Inhoudsopgave
Advertenties
Time zone correction:
"TIMEZONE" appears in the text display and the default setting "0"
blinks.
You can use the "+" or the "-" button to correct the time zone
from
- Select 12 to + 12 hours.
Alarm tone ON / OFF:
In the Tex The display shows "ALERTSOUND" and the default setting "On" flashes. With the "+"
In the Tex The display shows "ALERTSOUND" and the default setting "On" flashes. With the "+"
or the "-" button you can set the alarm tone
deactivate (OFF) or activate (On). If the alarm tone is active, the alarm tone symbol (bell) is also
shown in the toolbar. If the alarm tone is deactivated, the alarm tone symbol (bell) is not visible
in the toolbar.
This setting only applies to the alarm tone. Set alarms are still registered when they are
exceeded or undershot and are also shown optically on the display. Only the beep in the event
of an alarm is through
Radio clock reception ON / OFF:
"DCF" appears in the text display and the default setting "On" flashes. With the "+" or the "-"
button you can switch the radio clock deactivate reception (OFF) or activate (On).
button you can switch the radio clock deactivate reception (OFF) or activate (On).
12/24 hour time display format:
"TIMEFORMAT" appears in the text display and the default setting "24 h" flashes. Also the
current time
Display area displayed. With the "+" or the "-" key k can
Display area displayed. With the "+" or the "-" key k can
You select the 12 hour format "12 h" or the 24 hour format "24 h". If the 12 hour format is
selected,
AM or PM are also displayed in the time display area.
Temperature unit ° C / ° F:
"TEMP UNIT" appears on the text display nd in the display area the temperature is next to the
"TEMP UNIT" appears on the text display nd in the display area the temperature is next to the
Presetting "° C" flashes. With the "+" or the "-" button you can choose between "° C" or "° F".
Note:
this setting active or inactive.
current temperature
11
in its
the
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
