Inhoudsopgave
Advertenties
Connector socket open
Battery compartment
FIRST INSTALLATION:
When the KlimaLogg Pro is powered up, a short beep will sound and all LCD segments will light up.
The KlimaLogg Pro shows the current temperature and humidity values.
radio-controlled time is displayed and the DCF reception indicator remains on the LCD.
"INDOOR" is displayed in the text field, and 00:00:00 and 01.01.10 are
displayed in the time and date area (the device counts up the time until the DCF signal has been
received or the time and date are manually set).
reception indicator flashes. If the time code has been received after 5-10 minutes, the
After the KlimaLogg Pro has been started up, it searches for external transmitters for three minutes.
After a battery change, the transmitters that were entered previously are once again assigned the
channel that had previously been assigned to them. External transmitters that had not been previously
detected are automatically entered on a available channel.
begins to search for the DCF signal (german radio-controlled clock signal), and the DCF
DCF RADIO CONTROLLED TIME RECEPTION
After the KlimaLogg Pro has searched for external transmitters for three minutes, the device
•
collector
1.
Insert finger or other solid object in the space
at the bottom center of the battery
compartment and lift up to remove the cover.
Insert the batteries, pay attention to their
2nd
correct polarity.
3rd
Insert compartment cover and close it.
32
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
