Inhoudsopgave
Advertenties
- Upper humidity limit ("HIGH AL RH", default setting 70%)
- Lower humidity limit ("LOW AL RH", default setting 20%)
- Upper limit temperature ("HIGH AL ° C", default setting 40 ° C)
- Untergr Current temperature ("LOW AL ° C", default setting 0 ° C)
Untergr Current temperature ("LOW AL ° C", default setting 0 ° C)
While a limit value is being displayed, it can be
•
Press the "+" or "-" button.
To activate an alarm limit, the "OK / MAX.MIN." Key are pressed while the
To activate an alarm limit, the "OK / MAX.MIN." Key are pressed while the
•
corresponding limit values a re displayed.
If the alarm limit is activated, the alarm on / off symbol is displayed in the toolbar (not
•
crossed out).
If the alarm limit is not active, the alarm on / off symbol is shown inactive
•
(crossed out).
Hold the "+" or "-" button in the respective setting mode
•
pressed, you go to high-speed.
Press the "ALM" - Button again or if you do not press any button for 20 seconds, you
Press the "ALM" - Button again or if you do not press any button for 20 seconds, you
•
will return to normal mode.
Alarm function
In the event of an alarm, ALARM flashes above the date and the corresponding
•
channel number, as well as the Hi or Lo symbol within the channel causing it.
If the acoustic alarm tone is activated, the symbol (bell) flashes and the alarm
•
tone sounds for 2 minutes.
Press the ALM button to turn off the alarm sound.
•
The corresponding "Hi" or "Lo" symbol and "Alarm" will appear
•
continues to flash until the corresponding value is again within the alarm limit or the
alarm limit is deactivated in the alarm setting mode.
Is any alarm limit activated (no matter which or on which one?
Channel), is displayed permanently in normal mode "ALARM" (in
In the basic settings of the logger, the
Time and date display area).
acoustic alarm sound can be deactivated.
Note:
17th
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
