Inhoudsopgave
Advertenties
TRANSMITTER:
Use your logger with additional external transmitters, and if these have already been added to
•
the logger during commissioning or through the learn mode, you will see a number for each
occupied channel in the channel display.
After inserting the batteries in the outdoor transmitter, the transmitter starts automatically
•
with the transmission of the external measured values.
After successfully commissioning the transmitter, close the battery
•
compartment again carefully.
In normal view and also in history mode you can use
•
simply press the "+" and "-" buttons up or down
through the existing channels. A triangle appears above the currently selected channel symbol
and the current values o f the channel are displayed in the temperature and humidity display
area.
The compatible outdoor transmitters cat.no. 30.3180.IT and 30.3181.IT each have their own
•
fixed serial number (four-digit, alphanumeric). This serial number is printed on the respective
transmitter and is also brief when the transmitter is started up
The serial number is also shown on the text display (if the transmitter has been selected on the
logger). Using the PC software, you have the option of assigning an individual name for each
channel (except for your own measured values f rom the
Loggers, "INDOOR" is permanently displayed as the name.)
If you no longer know with your own channel names with certainty which transmitter is on
which channel, this can be done in
Learn mode can be called up. In learn mode, the serial number of the
A symbol for status information can be displayed in the channel display for each transmitter. This is a
bar that is displayed under the channel number. If the bar flashes, the batteries of the corresponding
transmitter are already weak and should be replaced (in this case a symbol also appears
"TX" in the display area of t he temperature if the corresponding channel
selected / displayed). If a bar is displayed permanently, the radio contact to the corresponding
transmitter is interrupted.
shown in its own display. The
Note:
entered channel is displayed.
13
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
