Inhoudsopgave
Advertenties
Range of the device,
affect.
To re-establish contact between transmitter and receiver after a radio loss, please read the relevant
area in the instructions for use. If the contact does not come about or is interrupted again and again,
check the basic function of your devices if they are placed directly next to each other. If the basic
function is provided side by side, but radio contact at the desired location is not reliably possible, it is
advisable to optimize the radio connection by changing the location of the logger and / or transmitter /
transceiver.
PC software:
Please note the help function within the PC software and the instructions for use contained on the
software CD as a PDF file.
PLACEMENT OF THE LOGGER
The logger offers the option of table installation or wall mounting. Before mounting on the wall, please
make sure that any transmitters used are correctly received at the desired mounting location.
CARE AND MAINTENANCE
Clean the device and the transmitter with a soft, slightly damp cloth. Do not use abrasives or
•
solvents! Protect from moisture.
1.
Fasten a suitable screw (not included in the scope of delivery) in
the desired wall and let its head protrude about 5 mm from the
wall.
Fold in the table stand of the logger and hang it on the screw using
2nd
the eyelet on the back. Make sure that the device is securely
locked in place on the screw before you let go.
24th
can the radio contact
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
