Inhoudsopgave
Advertenties
Manual time setting:
"TIME SET" appears in the text display and the hour display flashes in the time display area.
With the "+" or the "-" button
the hour display can be set.
Press the "SET" - Button again and set the minutes in the same way.
Press the "SET" - Button again and set the minutes in the same way.
Manual date setting:
"DATE S ET" appears on the text display and the year flashes in the date display area. With the
"+" or the "-" key
the year display can be set.
Press the "SET" - Button again, the month starts to flash and can with the "+" or the "-" key
Press the "SET" - Button again, the month starts to flash and can with the "+" or the "-" key
Press the "SET" - Button again, the month starts to flash and can with the "+" or the "-" key
can be set.
Press the "SET" - Button again, the day display
Press the "SET" - Button again, the day display
starts to flash and can be pressed with the "+" or the "-" button
can be set.
Main reset (reset to factory settings):
In the text disp lay appears "MAIN RESET". If the "OK / MAX.MIN." Keeping the button pressed
In the text disp lay appears "MAIN RESET". If the "OK / MAX.MIN." Keeping the button pressed
In the text disp lay appears "MAIN RESET". If the "OK / MAX.MIN." Keeping the button pressed
for 3 seconds, the logger deletes all settings and recorded data. This will restore the logger
Original state shifted. After di e "OK / MAX.MIN." - Button has been pressed for 3 seconds, the
Original state shifted. After di e "OK / MAX.MIN." - Button has been pressed for 3 seconds, the
Original state shifted. After di e "OK / MAX.MIN." - Button has been pressed for 3 seconds, the
progress of the reset is shown in% in the memory display. When the reset has been completed,
the logger will automatically restart.
Please note that this main reset includes all
recorded data are deleted. If necessary, make sure that the logger no longer
contains any relevant data that has not yet been called up or sent to the PC
If the device malfunctions, the first thing to do is
Check batteries and carry out normal commissioning. If there is still a
malfunction despite the batteries being properly installed and being put into operation
again, it is
Note:
were transferred.
makes sense to carry out a main reset
12th
in the
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
