Inhoudsopgave
Advertenties
-
Radio-controlled time reception ON / OFF
-
12/24 hour format
-
Temperature unit (° C / ° F)
-
Manual time setting
-
Manual date setting
-
Main reset
After you press and hold the SET button for three seconds, you are automatically taken to the first
setting option for basic settings, the contrast setting. Pressing the SET button once again takes you to
the next setting option.
If no button is pressed for 20 seconds, the KlimaLogg Pro automatically switches back to the normal
view. You can return to the normal view at
any time by pressing the "HIST / DEL", the "USB" or the "ALM" button.
Changes at the setting-mode require no additional confirmation and are automatically saved
when you leave or go further to the next setting.
If you press and hold the "+" or "-" button, you are quickly taken through
the possible settings (time, date and time zone settings).
LCD contrast:
"CONTRAST" appears on the text display and the default "5" starts
"CONTRAST" appears on the text display and the default "5" starts
"CONTRAST" appears on the text display and the default "5" starts
flashing. With the + or - button you can select between 0 until 7 as the LCD contrast.
Time zone:
"TIMEZONE" appears on the text display and the default "0" starts
"TIMEZONE" appears on the text display and the default "0" starts
"TIMEZONE" appears on the text display and the default "0" starts
flashing.
With the + or - button you can set the time zone (-12 until +12 hours).
Alarm sound ON / OFF:
"ALERTSOUND" appears on the text display and the default "ON"
"ALERTSOUND" appears on the text display and the default "ON"
"ALERTSOUND" appears on the text display and the default "ON"
starts flashing. With the + or - button you can deactivate (OFF) or activate (ON) the alarm
sound. If the alarm sound is activated, the alarm symbol will appear (bell) in the toolbar. If the
alarm sound is deactivated, the alarm symbol does not appear.
Grade:
36
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
