Inhoudsopgave
Advertenties
This setting is related to the alarm sound only. Alarms that have been set, continue to be
registered. So they are shown on the display as well. Only the sound is activated or
inactivated by this setting in case of
Time reception ON / OFF:
"DCF" appears on the text display and the default "On" starts
"DCF" appears on the text display and the default "On" starts
"DCF" appears on the text display and the default "On" starts
flashing.
With the + or - button you can deactivate (OFF) or activate (On) the DCF time reception.
12/24 hour format:
"TIMEFORMAT" appears on the text display and the default "24 h"
"TIMEFORMAT" appears on the text display and the default "24 h"
"TIMEFORMAT" appears on the text display and the default "24 h"
starts flashing. So the current time will be shown in the display. With the + or - button you can
select between 12 hr or 24 hr time format. If you select the 12 hr time format, AM or PM
appears in the display additionally.
Temperature unit (° C / ° F):
"TEMP UNIT" appears on the text display and the default "° C"
"TEMP UNIT" appears on the text display and the default "° C"
"TEMP UNIT" appears on the text display and the default "° C"
starts flashing. With the + or - button you can select between "° C" or "° F" as the temperature
starts flashing. With the + or - button you can select between "° C" or "° F" as the temperature
unit.
Manual time setting:
"TIME SET" appears on the text display and the hour digits start flashing. With the + or - button
"TIME SET" appears on the text display and the hour digits start flashing. With the + or - button
you can set the hours. Press SET button again and set the minutes by the same way.
Manual date setting:
"DATE S ET" appears on the text display and the year starts flashing. With the + or - button you
"DATE S ET" appears on the text display and the year starts flashing. With the + or - button you
can set the year. Press SET button again and the month starts flashing. With the + or - button
you can set the month.
Press SET button again and the day starts flashing. With the + or - button you can set the day.
Main reset (resetting back to factory settings):
"MAIN RESET" appears on the text display. If the "OK / MAX.MIN."
button is now pressed and held for three seconds, the KlimaLogg Pro deletes all settings and
recorded data. The KlimaLogg Pro is
reset to factory settings. After the "OK / MAX.MIN." button has been
Grade:
on alarm.
37
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
