"Minus" -------------------- Channel change within the selected one
"Minus" -------------------- Channel change within the selected one
"Plus" ----------------------- Channel change within the selected one
"Plus" ----------------------- Channel change within the selected one
"ALM" ---------------------- Separation of the AlarmEvent data records
"ALM" ---------------------- Separation of the AlarmEvent data records
"SET" --------------------- back to normal view
"SET" --------------------- back to normal view
If you press the ALM key in HISTORY MODE, you will get to the most current alarm
•
event record.
The channel responsible for the alarm, the value and the corresponding upper or lower
•
limit symbol are always displayed automatically.
With the buttons "HIST / DEL" and "OK / MAX.MIN."
•
You can also browse through the different AlarmEvent data records (if available).
Press the T If you click "ALM" again, you are in the
Press the T If you click "ALM" again, you are in the
•
normal HISTORY MODE at the position of the last AlarmEvent data record displayed.
Hold down the "HIST / DEL" or "OK / MAX.MIN."
•
pressed, you can quickly scroll through the data records (steps of 50).
Press in the HISTORY MODE the "SET" - Button, or if you do not press any button for 2
Press in the HISTORY MODE the "SET" - Button, or if you do not press any button for 2
Press in the HISTORY MODE the "SET" - Button, or if you do not press any button for 2
•
minutes, you will return to normal mode.
PC CONNECTION:
The required PC software can be downloaded free of charge from the download area on
the TFA homepage (www.tfa-dostmann.de)
Please note regarding PC connection! It has to be between
"Synchronize" and "contact" differentiated will.
"Synchronize" and "contact" differentiated will.
= Make the hardware known / synchronized
= Establish radio contact to transfer new data.
Record (to the left)
Record (to the right)
Note:
will.
Note:
"Synchronize"
"To contact"
19th