Inhoudsopgave
Advertenties
MAX.MIN.VALUES AND CURRENT DEW POINT in the selected channel:
Press the OK / MAX / MIN button in normal mode.
•
MAX appears on the display and the maximum humidity is shown.
•
Press the button again.
•
The maximum temperature is displayed.
•
Press the OK / MAX / MIN button again.
•
MIN appears in the display and the minimum humidity is shown.
•
Press the button again.
•
The minimum temperature is displayed.
•
Press the button again.
•
DEW appears on the display.
•
The current dew point is displayed.
•
The corresponding time and date when the respective value was determined is
•
also displayed.
The corresponding channel number is also shown in the channel display
•
and the name or serial number of a entered transmitter is shown in the text
display.
To delete the MAX.-MIN. Values, press and hold the OK / MAX / MIN
•
button for 3 seconds.
The max.min. Values i n all channels are deleted.
•
The current temperature and humidity appear on the display for all channels.
•
Max.min. Values a re not recorded in a data record. In the PC software, therefore, only the
current max.min. Values a re shown
ALARM SETTING MODE:
In normal mode, hold down the ALM button for 3 seconds.
•
HIGH AL RH for the selected channel appears on the display.
•
The upper alarm limit for air humidity flashes on the display.
•
With the "ALM" - Button you can now display the possible alarm limits one after the
With the "ALM" - Button you can now display the possible alarm limits one after the
•
other:
Note:
displayed.
16
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
