Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
TROUBLE
The engine does not start by
turning on the ignition switch.
The engine stops during
operation.
The side brooms do not rotate.
The machine does not move
by pressing the pedal (5, Fig.
C).
(1): For the procedure, see the Petrol Engine Manual.
For further information, refer to the Service Manual,
available at any Nilfisk Service Center.
146 2598 000(2)2006-06 A
REMEDY
Check the engine oil level (1).
Check if the fuel tap is open.
Check if there is fuel in the tank.
Check if the hood is closed.
Check if the fuel reaches the
carburettor (1).
Check if the spark plug produces a
spark (1).
Check the engine oil level (1).
Check if there is fuel in the tank.
Lower the side brooms.
Check the fuse F5 in the box (23,
Fig. U) for integrity.
Check that the parking brake (6
and 7, Fig. C) has been released.
Check that the switch (27, Fig. U)
is in "I" position.
Check that the drive pedal (5, Fig.
C) is not pressed while starting the
machine with the ignition switch (2,
Fig. B), or while the operator is
sitting on the driver's seat. The
drive pedal (5, Fig. C) has to be
pressed only after the operator has
sit on the driver's seat and the
machine has been started.
USER MANUAL
SCRAPPING
Have the machine scrapped by a qualified scrapper.
Before scrapping the machine, remove the following
materials, which must be disposed of properly according
to the law in force.
–
Polyester dust filter
–
Main and side brooms
–
Engine oil
–
Electrical and electronic components (*)
–
Plastic components and hoses
(*) Refer to the nearest Nilfisk Center especially when
scrapping electrical and electronic components.
ENGLISH
FLOORTEC R 360 P
17
Advertenties
Hoofdstukken
Inhoudsopgave
