Inhoudsopgave
Advertenties
Als u een of meer van deze problemen tegenhoudt, dient u de aanbevolen herstelprocedure te volgen.
Zodra de printer is gediagnosticeerd en goed functioneert, kunt u de diagnostische plot opnieuw
afdrukken zoals is beschreven in
Scan or copy the diagnostic plot
There are two options for evaluating the diagnostic plot: scanning into a JPEG file, or copying onto
paper. We recommend using the scan option, so that the generated file can be analyzed more easily
by a remote support engineer if necessary. If you decide to scan the plot, first adjust your computer's
monitor. Once you have scanned the diagnostic plot, remember to open the scanned file in any image
viewer software and select a zoom of 100% for correct visual evaluation of patterns.
If you decide to copy, make sure that a paper roll at least 914 mm () wide is loaded in the printer. Ideally,
the same type of paper used to print the diagnostic plot should be used for copying it.
These are the settings that you should select:
Scan
●
Quality: Max
●
File type: JPG
●
Content type: Image
●
Compression: medium
●
Paper type: photo or matte, according to the paper used to print the diagnostic plot. Use photo if in
doubt.
Copy
●
Quality: Best
●
Content type: Image
108
Hoofdstuk 7 Scannen en kopiëren
Diagnostische plot scanner op pagina
107.
Advertenties
Inhoudsopgave
Probleemoplossen
