Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Options - Hand-Bike Axle
Hand-Bike-Axle
It is necessary to adjust the hand-bike axle to bias the
centre of gravity rearwards. This allows safe use of a
hand-bike accessory, (Fig.63).
DANGER!
Using a hand-bike without the hand-bike axle makes the
wheelchair unstable and can lead to serious injury of the
user and other people.
Hand-Bike Reinforcement Kit
To assemble the hand-bike reinforcement kit:
•
Insert the nipple at one end of the cable into the
receptor at the front of the frame, (Fig.64).
•
Insert the nipple at the other end of the cable into
the receptor at the rear of the frame, (Fig.65).
•
Insert the tensioner tool, (A), into the cable receptor
at the rear of the frame, (Fig.66).
•
Move the tensioner tool, (A), upwards until the
receptor and the front tube, (B), just starts to move
towards the rear, (Fig.67).
•
Hold the cable under tension with the tensioner tool
and tighten the screw on the rear cable receptor,
(Fig.67).
•
Repeat the process for the other side.
WARNING!
The tension of both cables must be checked for
tightness before and after each use of the hand-bike.
XENON FF
Fig. 63
A
A
Fig. 64
30
Fig. 65
Fig. 66
Fig. 67
B
Rev.2.0
Advertenties
Hoofdstukken
Inhoudsopgave
