Advertenties
Hella Gutmann
ð You can use the Wi-Fi connection now.
8.7.1.2. Resetting the Wi-Fi Configuration
You can reset the Wi-Fi configuration if you wish to remove the automatic connection between diagnostic device and al-
ready created wireless network.
Proceed as follows to delete all known wireless networks:
1. Select
> Settings.
2. Select >Device<.
3. Select >Wi-Fi<.
4. Select
.
5. Click to >Reset Wi-Fi configuration<.
ð The Wi-Fi configuration is reset.
8.7.2. Configuring the Ethernet
Here you can make your network settings.
Proceed as follows to connect the diagnostic device to a network (router) via Ethernet interface:
1. Plug in the Ethernet cable (not included in delivery contents) in the Ethernet ports of the mega macs X and the Ether-
net remote station.
2. Select
> Settings.
3. Select >Device<.
4. Select >Ethernet<.
5. Open the list under IP address mode with
ð If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs X automatically. This option is set ex works.
ð If >Determine manually< is selected, enter a free network IP address, e.g. 192.168.246.002. under IP ad-
dress.
6. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
7. Click to >Connect<.
ð The selection will be saved automatically.
ð You can use the Ethernet connection now.
8.7.3. IP address of PC
Here you can view the IP address of the PC. An internal or rather local IP address clearly identifies a network device with a
number within the network. This is necessary to be able to clearly identify the diagnostic device.
mega macs X
.
Configuring the mega macs X | 8.
449
Advertenties
Probleemoplossen
