Advertenties
Hella Gutmann
CAUTION
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
Proceed as follows to perform the basic setting:
1. Plug in the OBD plug in the vehicle's diagnostic connector.
2. Select Diagnostics > Basic settings in the App launcher.
3. Select the requested assembly.
4. Select the requested system.
5. Follow the instructions on the screen and start the procedure with >Start<.
6. Regard the window with information and instructions.
ð Communication to vehicle is being established.
7. Follow the instructions on the screen.
9.4.7. Coding
Here you can code components and ECUs. Codings are necessary, if components have been replaced or additional func-
tions in an electronic system must be activated.
9.4.7.1. Performing Codings
NOTICE
Select a vehicle first before doing any codings.
For more information about the vehicle selection read the sections Vehicle selection [} 366] and CSM
vehicle selection [} 367].
mega macs X
Working with the mega macs X | 9.
379
Advertenties
Probleemoplossen
