Advertenties
7. | Putting the mega macs X into Operation
NOTICE
It is recommended to add a shortcut of the mega macs X setup on the start screen once. Hence you do not
need to manually enter the address http://macsx (http://macsx.local or http://192.168.4.1 in the browser ev-
ery time you set up the connection to the mega macs X.
Perform the steps as described in section Creating a Shortcut [} 438] to add the setup of the mega macs X
to the start screen.
ð After having completed the installation process you can start the mega macs X through the shortcut on the start
screen.
Establish the Wi-Fi connection and call up the SDI diagnostic interface – manually:
1. Start a manual search for Wi-Fi through the displaying device.
2. Select the SSID macsx** (** marks the device number).
3. Enter the Wi-Fi password (key) and connect to Wi-Fi.
NOTICE
The Wi-Fi password (key) is additionally written on the type label at the back of the mega macs X.
4. Open the web browser and enter the following address in the address bar: http://macsx.
NOTICE
Should you use a displaying device with Windows operating system, then enter the address http://macsx.lo-
cal or http://192.168.4.1 in the address bar.
Connection cannot be established if http:// is not entered.
5. The SDI setup will start automatically in the next step to activate the mega macs X.
6. Select the Wi-Fi network.
436
Hella Gutmann
mega macs X
Advertenties
Probleemoplossen
