Advertenties
9. | Working with the mega macs X
WARNING
The ECU is not coded or is incorrectly coded
Death or severe injuries of persons due to improper or even wrong ECU operation.
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
1. Some working procedures require a specific training, e.g. working on the airbag.
2. Regard the window with information and instructions.
CAUTION
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
Proceed as follows to perform a coding procedure:
1. Plug in the OBD plug in the vehicle's diagnostic connector.
2. Select Diagnostics > Codings in the App launcher.
3. Select the requested assembly.
4. Select the requested system.
5. Follow the instructions on the screen and start the procedure with >Start<.
6. Regard the window with information and instructions.
7. Follow the instructions on the screen.
9.4.8. Test function
Use this function to check a certain component group for correct function.
380
Hella Gutmann
mega macs X
Advertenties
Probleemoplossen
