Inhoudsopgave
Advertenties
This machine complies with Machinery Directives 2006/42, 2014/35, 2014/30 and is CE-marked as
proof of this compliance.
Please familiarise yourself with the safety pictograms displayed on the machine:
This pictogram indicates an electrocution hazard. Please isolate the machine
before carrying out any work on it. You will find this pictogram inside the machine
on the electrical enclosure (fig.14, n°27).
You will find the circuit diagram for the machine inside the left-hand door of the
divider (fig.14, n°28).
This pictogram indicates a crushing hazard. Please isolate the machine before
carrying out any work on it. You will find this pictogram on the side doors (fig.14,
n°29).
5.4
Commissioning
Before commissioning, ensure that there are no extraneous objects interfering with the machine's
moving parts.
Ensure first of all (after verifying electric compatibility) that the motor is rotating in the right direction.
When the power is switched on, the green button flashes; press to start initialisation. If the heads do
not rise during this stage and the indicator flashes rapidly, disconnect the plug and switch 2 phases in
it.
For machine operation, refer to the "Operation" chapter.
5.5
Hazard
If the user or the machine is in danger, use the emergency stop to stop the machine.
Remove the plug from the mains socket before any maintenance and/or servicing work.
Any maintenance work or replacement of parts must be carried out by an approved agent.
6
CONTROLS AND SAFETY FEATURES
6.1
Controls
Your machine is equipped as standard with a mechanical control panel (fig.3).
6.2
Setting area
The pressure setting and flour recovery area is located at the front of the machine (fig.7), as well as
the pressure time setting area and the half tank/full tank selector.
6.3
Work area
The work area is at the front of the machine (fig.4).
English
10
Advertenties
Hoofdstukken
Inhoudsopgave
