6.4. Automations & scenes
The Comfion system offers you the option of configuring up to 100 scenarios. These scenes or automations can be set
completely freely, giving you maximum flexibility.
You can add both scenes and automations under the "Scenes" tab.
Mutually contradictory or circularly calling automations must not be created. This can lead to serious
functional problems with the control panel.
Attention
Make sure that you leave an interval of at least 5 seconds between two switching commands for the
same device to ensure problem-free operation.
Attention
Scene = Action triggered by a user via the app (hotkey). Can be displayed in the dashboard.
Example: Socket ON/OFF via app
Example configuration of a scene:
Name / symbol assignment
Automation = Always consists of if and then parts. Freely configurable.
Example: If system is armed, Then light off
In the If-part you can choose between an AND condition & an OR condition. With the AND condition, ALL conditions must
be fulfilled for the action to be executed. At least ONE condition must be fulfilled for the action to be executed with the
OR condition.
In the If section, you can choose between the following categories for the events:
•
System -> Here you will find system events such as a power failure, but also the schedule
•
Partition -> Partition events such as arming/disarming, intrusion, ready to arm and much more can be found here
•
Zone -> All zone-related events can be found here (e.g. zone intrusion)
•
Room -> All components and the associated events can be found here (e.g. opening detector contact opened or wall
button pressed)
•
Explanation "Advanced":
Under "Advanced", you can set a time that defines how long the set conditions must apply before the action is
executed. The action is only executed if the conditions apply for the set time period and no longer change.
Example: If door is open for 30 seconds, Then send push notification
Scene settings
→
Add action
→
Action selection
→
|27