Advertenties
6.
General information, maintenance and notes
6.1. Gateway configuration
Under the menu item Gateway configuration, you will find all the important information about your control panel and
can also make important settings for the system
After you have called up the Gateway configuration menu item, you will see the following information:
•
Control panel name (input field)
•
Symbol (can be replaced by own photo)
•
Network (display of the type of network connection)
•
Mobile communication status (drop-down)
Module type (installed mobile communication chip)
o
SIM card (display whether inserted)
o
Phone call (display whether possible with inserted SIM)
o
Connection (display via connection status)
o
Signal strength (dBm)
o
•
Power supply (display of mains adapter or battery)
•
Firmware (click to display the version and release notes)
•
Modem (display of the modem FW)
•
Item number
You can open further settings menus via the cogwheel icon at the top right. The settings for SIA DC-09, telephone call
and the modem can be found under 5. Communication.
6.1.1. General information
Information about the inserted storage medium (hard drive or SD card) is displayed under the "Memory" heading.
The time zone used and the NTP server are displayed under the heading "Date and time".
6.1.2. Network
In this menu, you can view the network settings and adjust them if necessary.
You have three possible methods to choose from:
DHCP (default): Dynamic Host Configuration Protocol is a client/server protocol through which the Comfion is
automatically provided with its IP address and other associated information by the router.
PPPoE: Point-to-Point Protocol over Ethernet is a network protocol that provides a direct connection in the internal
network. This requires authentication by user name and password.
Static: If "Static" is selected, the Comfion network data is assigned manually. Discuss this with the network operator
and do not assign an IP address from the DHCP pool.
Incorrect IP settings mean that your system cannot connect to the network, making it
inaccessible to the app. In this case, press the "connect" button on the back of the system for 6
seconds and then release it. The control panel will then restart and reset its network settings to
Note
the default DHCP settings.
|22
Advertenties
