Advertenties
3.2.6. Alarm modes
The Comfion wireless security system works with so-called "alarm modes", which form the core of the system. These
are links between partitions and users for arming and disarming.
In an alarm mode, you define which user arms or disarms which partition with this alarm. This makes it possible to
map all possible scenarios for arming and disarming.
In practice, a user is actually executing an alarm mode when arming or disarming.
The Comfion wireless security system has two preconfigured alarm modes in the factory
Note
settings: "Fully Arm" and "Fully disarm", which contain all the zones created.
Execution of an alarm mode
The button at the bottom centre of the screen shows the current status of the system (armed,
o
disarmed, partially armed or maintenance mode)
By pressing the button, the available alarm modes are displayed and you can execute the
o
corresponding switching command.
Creating or editing alarm modes
1.
You can open the alarm mode management area by clicking on the bottom centre button as described in the
previous step and then on the settings icon in the top right-hand corner of the screen.
2.
Then click on "Add alarm mode" or edit an existing alarm mode by pressing and holding on it.
3.
After you have assigned the name for the alarm mode, select the partitions AND the type of switching (armed or
disarmed). To change the type of switching, click on the icon.
4.
In the next step, select the users who should be authorised to switch this alarm mode.
5.
After completion, the alarm mode appears in your overview and can be used.
→
→
→
|14
Advertenties
