Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
m
CAUTION! Risk of injury!
Disconnect the mains plug
u
changing the setting on the product .
˜ Mounting the handle
(Fig . A)
m
WARNING!
The product must only be operated with
u
the handle
mounted .
1 ]
[
Depending on the method of working,
o
tighten the handle on to the handle thread
on the left
, right (Fig . A) or top
5 ]
[
the product .
˜ Assemble/set the protective
cover/demounting
(Fig . D)
NOTE
If the protective cover
u
the position illustrated in fig . D j, push
the whole protective cover against the
product and turn it at the same time .
Adjust the protective cover
o
sparks or detached parts cannot hit either
the user or any bystanders .
Position the protective cover
o
the sparks cannot ignite combustible parts,
including those in the surroundings .
Demounting the grinding wheel
1 . Press the spindle lock button
2 . Turn the mounting spindle
spindle lock fixed the mounting spindle .
Keep and continue to hold down the
spindle lock button
3 . Release the clamping nut
the chuck key
10 ]
[
spindle lock button
before
[
9 ]
of
[
2 ]
is engaged in
7 ]
[
such that any
7 ]
[
such that
[
7 ]
(Fig . A) .
[
8 ]
until the
[
13 ]
.
8 ]
[
(Fig . B) with
12 ]
[
(Fig . A) . Release the
.
[
8 ]
4 . Take off the clamping nut, the mounting
flange
(Fig . B) and cutting wheel from
[
11 ]
the mounting spindle .
Attaching the protective cover
1 . Put the protective cover
such that the open side is facing back
towards the product .
The teeth on the protective cover and on the
product must mesh together (Fig . D j) .
2 . Push the protective cover
product to turn it (Fig . D k) .
3 . Fasten the screw
17 ]
[
cover
by pressing it into the flute of the
[
7 ]
product's teeth .
4 . Turn the protective cover
working position . The closed side of the
protective cover must always face the
operator .
5 . Readjust the position of the protective
cover
if you find during use that it does
7 ]
[
not provide optimum protection .
Removing the protective cover
1 . Take off the protective cover
removing the screw
an object such as a small screwdriver
(Fig . D l) .
˜ Fitting the attachment to/
removing the attachment
from the protective cover
(Fig . E)
Fitting the attachment
1 . Fit the attachment for the protective
cover
, with the side on which the
7a ]
[
running direction is indicated by an arrow,
onto the protective cover
2 . Push the attachment
cover
until it clicks into place .
[
7 ]
onto the product
7 ]
[
towards the
7 ]
[
to secure the protective
into the
[
7 ]
by
7 ]
[
with the help of
[
17 ]
.
[
7 ]
onto the protective
[
7a ]
GB/IE/NI
17
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
