Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Blue Eco Manual | English
/ keys
Example 1
(Model Marine)
Option 1:
Suction side / Discharge side: three-piece 50mm coupling (AA255)
can be fitted with hard PVC glue (e.g. Uni 100). Do not glue perma-
nent fittings (such as a regular sleeve coupling) to the pump,
because this makes it very hard to disconnect the pump!
Option 2:
Suction side / Discharge side: a flexible 50mm-to-50mm (FC120)
or 50mm-to-40mm (FC140) coupling can be fitted. Thanks to
the rubber feet on the bottom, the pump is now comple-
tely vibration-free and flexibly connected.
Example 2
(Model 240/320)
Option 1:
Suction side: a two-piece 2½"x63mm coupling with
rubber ring that provides the seal (AG287).
Discharge side: a three-piece 63mm coupling (AA256) can be fitted
with hard PVC glue (e.g. Uni 100). Do not glue permanent fittings
(such as a regular sleeve coupling) to the pump, because
this makes it very hard to disconnect the pump!
Option 2:
Suction side: a 90mmx2½" inner diameter adhesive ring (AB367) can be attached
with a little liquid Loctite 5331 (AK142) or Teflon tape (AK119/120). Then a flexible
90mm-to-110mm (FC148) or 90mm-to-63mm (FC146) coupling can be fitted.
Discharge side: a flexible 63mm to 63mm (FC122) or 50mm to 90mm (FC146)
coupling can be fitted. Thanks to the rubber feet on the bottom, the
pump is now completely vibration-free and flexibly connected.
Use the / o set the power of the pump. This will also change the flow (l/h) and the
energy consumption (W) and the RPM. The power can be set between 10 and
240/320/500/900/1500/2200 watt (depending on the model). The pump will always
run on the set power. After a power break the pump will automatically return to the last
setting.
Advertenties
Inhoudsopgave
