Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Blue Eco Manual | English
Press MENU button to access menu items
System
Manual
Timer A
Timer B
System menu
From the System menu you can select the timer, select whether the controller is controlled via a data cable and set the clock. The
System menu is also where you can release the controller using the activation codes. The system is used for all the programmed start
and stop times and functions. The system clock continues to run for at least 96 hours after the power supply is disconnected. After this
time has elapsed the current time must be re-entered.
MENU
12:00
System
1. Turn on the controller and wait until '0' appears on the display.
2. Press the Menu button.
3. Press the arrow buttons to scroll through the various menu items. Select the System menu with the select button.
4. A. To select the correct timer: Use the arrow buttons to go to 'Timer mode', then press select.
B. Now you can use the arrows to select the appropriate timer (A to E). Select the timer you entered.
C. Press 'Enter'; the right timer is selected.
D. The display now shows 'Alert Keydata Modified'.
E. Now press 'RESET'.
MAIN SCREEN
Timer mode
(A~E)
Command Source
(Panel,Uam,Host)
CLOCK
(Hour:Minute)
Serial numble1
(0~9999)
Serial numble2
(0~9999)
Active Code1
(0~9999)
Active Code2
(0~9999)
FMP Function
(Disable/Enable)
Parameter set
(Editable/Lock/Initialize)
Set Speed
(300~3000RPM)
Set Cruise
(Disable/Enable)
Test mode
(Disable/Enable)
Start time
(Hour:Minute)
Set Speed 1
(300~3000RPM)
Mid time
(Hour:Minute)
Set Speed 2
(0~3000RPM)
Stop time
(Hour:Minute)
Repeat enable
(Disable/Enable)
Start time
(Hour:Minute)
Set Speed 1
(300~3000RPM)
Mid time 1
(Hour:Minute)
Set Speed 2
(0~3000RPM)
Mid time 2
(Hour:Minute)
Set Speed 3
(0~3000RPM)
Mid time 3
(Hour:Minute)
Set Speed 4
(0~3000RPM)
Stop tim e
(Hour:Minute)
Repeat enable
(Disable/Enable)
System
12:00
A
Timer mode
Timer C
Timer D
Timer E
System
12:00
Panel
Command Source
Running time 1
(0:01~23:59)
Set Speed 1
(300~3000RPM)
Running time 2
(0:01~23:59)
Set Speed 2
(0~3000RPM)
Repeat enable
(Disable/Enable)
Start time
(Hour:Minute)
Set Speed 1
(300~3000RPM)
Mid time 1
(Hour:Minute)
Set Speed 2
(0~3000RPM)
Mid time 2
(Hour:Minute)
Set Speed 3
(0~3000RPM)
Mid time 3
(Hour:Minute)
Set Speed 4
(0~3000RPM)
Stop time
(Hour:Minute)
Repeat enable
(Disable/Enable)
Start time
(Hour:Minute)
Set Speed 1
(300~3000RPM)
Mid time 1
(Hour:Minute)
Set Speed 2
(0~3000RPM)
Mid time 2
(Hour:Minute)
Set Speed 3
(0~3000RPM)
Mid time 3
(Hour:Minute)
Set Speed 4
(0~3000RPM)
Stop time
(Hour:Minute)
Repeat enable
(Disable/Enable)
System
12:00
12:00
Clock
Advertenties
Inhoudsopgave
