Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Blue Eco Manual | English
The pipe work must be fitted in a way that possible mechanical stress (due to changing temperatures) have no negative influence
on the pump house. Any tubing on the intake line must be 100% air tight. If a hose was used as intake line, make sure the hose is in
accordance to the requirements for intake hoses. It is very important that the intake line on the pump head is primarily straight (min. 5
times the diameter of the inlet). This will increase the power of the pump, due to the laminar water flow on the impeller. Avoid short 90°
bends, try to use long swept bends (less pressure loss).
If the intake line is longer than 10 meters or the intake height is higher than 1 meter, the diameter of the intake line must be bigger than
the inlet of the pump.
Suction side:
40/50mm or 2 ½" male threaded (dependant of model). Suction line must be at least Ø75mm.
Advertenties
Inhoudsopgave
