Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. A. To control the controller manually or via the External connection: Use the
arrow buttons to go to 'Command Source', then press select.
B. Now you can use the arrow buttons to select UAM or PANEL. Choose PANEL for manual or UAM for external connection.
C. Press 'Enter'; the control method is selected.
D. The display now shows 'Alert KeyData Modified'.
E. Now press 'RESET' and in the top left corner of the display you will see MANUAL for manual or UAM for external control.
6. A. To set the correct time in the controller: Use the arrow buttons to go to 'Clock', then press select.
B. Now you can use the arrow buttons to enter the correct time. You can use Select to switch between hours and minutes.
C. Press 'Enter'; the correct time appears in the top right corner of the display.
Manual control
Manual control is set as the default when the pump leaves the factory. The first time, you must press the RUN button to start the pump.
In the future, after a power interruption the pump will always return to the set speed. When the pump is running in manual mode, the
Manual LED will be lit and the LCD display shows Manual on the first line. The pump will then run at the set speed.
Time modules
Time modules can be used for programming, e.g. for day and night operation, waterfalls, cleaning situations for swimming pool filters,
etc. Each timer can be programmed with its own schedule. Each timer also uses the speed control. This means, among other things,
that you can not only start and stop the pump at various times but also change the speed at different points in time. There are five
independent timers available, from A to E.
Advertenties
Inhoudsopgave
