EN
Fig. 8
2.5 Connection to the water drain
On the back of the machine there is an elbow connector which can be easily orientated towards
the nearest drain well.(fig.9)
Whenever water drain cannot be by gravity, the model with a built-in drain pump must be specifically
requested (fig.10): see in this regard para. 2.6 - PART 2.
Fig. 9
Fig.10
2.6 Model with drain pump
The end of a drain hose can be hooked-up to the edge of a sink, or connected to an outlet in the
wall; this outlet must be provided with an air breather or have a diameter larger than that of the
drain hose to allow the passage of air.
If an extension is required, it must not exceed 2 m in length. Avoid exceeding the difference of 40
cm between the point of connection of the drain hose and the base of the dishwasher.
Avoid exceeding the difference of 40 cm between the point of connection of the drain hose and
the base of the dishwasher.
18
18