Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PHASE
EN
0. Initial checks
1. Switch-on
2. Water loading
3. Water heating
5. Selecting the
washing time
26
DISHWASHER TYPE/REFERENCES FIGURE
Front loading dishwasher
Check that the tank is completely empty and clean
Check that the rotors are clean and free to turn
Check that the filter is clean and reaches the bottom of the container.
Check that the overflow tube is properly inserted in its housing
Close the door of the dishwasher.
Tap the ON/OFF KEY (2); the display
comes on and shows STAND-BY.
Touch the ON/OFF KEY (2); the
dishwasher will come on
The water is automatically loaded into the wash tank until it automatically
The water is automatically heated.
The display shows the temperature of the tank and boiler. To
the side of the display the squares corresponding to the BOILER
HEATING
(before)
The heating is concluded when both the squares are on and fixed.
Before starting washing, the message "READY" must appear on the display.
This message only appears after reaching of the minimum temperatures set
by the installer.
All dishwashers are equipped with automatic systems for the dosing of
detergent and rinse aid; the settings are imposed by the installer at the time
of installation.
both the detergent and the rinse aid are dosed automatically after loading
of the tank and at the end of each wash cycle.
Through the WASHING TIME SELECTION KEYS (1) or (5) it is possible to scroll
through the 4 wash cycles available.
The
washing
cycles
appears
on
the
The code consists of a letter that identifies the type of items to be washed, followed
by the figures that correspond to the cycle duration expressed in seconds.
The abbreviations are as follows:
G (Glass): Glasses
C (Cup): Small cups
D (Dish): Dishes
P (Pot): Pots
T (Trays): Trays
F (Flatware): Cutlery
See at the bottom of this table the list of wash programmes available
depending on the dishwasher model.
Close the lid of the dishwasher and
push the handle downwards.
Tap the ON/OFF KEY (2); the display
comes on and shows STAND-BY.
Touch the ON/OFF KEY (2); the
dishwasher will come on
reaches the top overflow pipe.
and
to
the
TANK
are
identified
display
in
the
26
Dish washer with lid
HEATING
(after)
will
by
a
code
first
row
at
the
flash.
that
top.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
