Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.1 Electronic dishwasher warnings and alarms
During operation of the dishwasher the following warnings may appear on the display. The alert
remains displayed even when the machine is switched off and the display backlight stays on.
NOTICE
EN
Maintenance
request
No salt*
* When the salt tank is filled for the first time, the no salt warning may not disappear immediately.
It is advisable to fill the salt tank with warm water to speed up the process of dissolving the salt. As the salt
dissolves, the water density changes allowing the float inside the tank to change position resetting the warning.
The following are the alarms that may appear on the display if there is an operating fault.
All warnings persist until the dishwasher is switched off and until subsequent switching on.
Certain serious alarms place the machine in "safe" mode (total block), others allow it to continue
standard operation, though with limited functions.
If after having performed the appropriate checks and having switched the machine off and back
on the alarm appears again, contact our technical service.
NOTICE
ER01
ER02
ER03
36
ALARM DESCRIPTION
This warning appears when the day
count expires or the cycle count
expires
This warning appears when the salt
level in the softener tank drops.
Managed only for machines with
built-in water softener
ALARM DESCRIPTION
Tank loading timeout::
the tank has not filled within the
maximum time expected
Boiler load timeout::
the boiler has not heated within the
maximum time expected.
Tank heating timeout: the tank has
not heated within the maximum time
expected. Tank heating is disabled
CHECKS PERFORMED BY THE END USER
Request the intervention of a technician
Add salt to the relevant tank.
CHECKS PERFORMED BY THE END USER
Water mains valve does not supply water.
Overflow tube not inserted or inserted
incorrectly. Rinse jets clogged
Water supply hose blocked
Upstream water softener not working
Water mains valve does not supply water
Water supply hose blocked
Upstream water softener not working
Overflow tube inserted incorrectly.
If the problem persists, request technical
assistance
36
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
