Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Fig. 6
2.2 Electric connection
ATTENTION!
The electrical connection must be carried out in compliance with the laws in force in the
country in which the machine is installed.
Before connecting the machine, make sure that the voltage and the frequency of the
electrical supply system correspond to that indicated on the plate and that the machine is
connected to an efficient earthing system;
symbol, necessary for the
On the back of the machine there is a clamp marked with the
equipotential connection between the different appliances.
The machine must be protected upstream against overcharges and short-circuits by an
omnipolar thermal magnetic switch, with sufficient power of interruption, or by a load switch
and gL-type fuses with adequate rate of flow.
A residual current circuit breaker coordinated with the resistance value of the user's
earthing system against indirect contacts must be installed immediately downstream of the
magnetothermic switch or of the circuit breaker/fuses.
The power cable supplied with the machine is H07RN-F-type.
13
13
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
