Download Inhoudsopgave Inhoud Print deze pagina

Installation; Positioning And Levelling - Sinmag Europe LAVO Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

phase nominal voltage rating 380 V.
• Failure to carry out regular, prescribed maintenance (see chap.6 – PART TWO)
Failure to carry out regular, ordinary maintenance is likely to cause damage or malfunction.
• Unauthorised modifications or tampering
EN
The dishwasher cannot be modified or tampered with in any part whatsoever.
• Use of non-original or unsuitable spare parts for the specific model
We recommend contacting the authorised sales office when purchasing spare parts and, in any
case, using spare parts only recommended or supplied by the Manufacturer.
• Total or partial non-observance of the instructions for use
SHOCK HAZARD
THIS MANUAL MUST BE READ CAREFULLY AND UNDERSTOODBEFORE INSTALLING AND USING THE
DISHWASHER.
Total or partial ignoring of the instructions for use of the dishwasher may expose personnel to safety
hazards and cause damage to the machine.
• Natural events
In the case of exceptional events such as earthquakes, flooding, etc., the Manufacturer does not
assume any responsibility for damage to things or persons due to the use of the dishwasher in the
afore-mentioned conditions or even for total or partial reconditioning of the same.

2. Installation

SHOCK HAZARD
Installation operations are to be carried out by qualified personnel in compliance with the following
instructions.

2.1 Positioning and levelling

The Manufacturer delivers the dishwasher already assembled and complete with all the accessories
necessary to be used properly.
If possible, place the dishwasher close to the electric and water mains connections. The machine
must be levelled on a flat surface by turning its 4 adjustable feet (fig. 6).
If the machine is recessed in undercounter installations, its side and back panels may be joined
to adjacent furniture or walls. The load and drain pipes may be left or right oriented, but once the
machine is positioned, the pipes and the electric cable must not be bent or compressed.
12
ATTENTION!
ATTENTION!
12

Advertenties

Inhoudsopgave
loading

Inhoudsopgave