Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CYCLE INSERTED
The washing cycle is running
BOILER HEATING
If heating is in progress the square
flashes, if heating is reached the square
is fixed
TANK HEATING
If heating is in progress the square
flashes, if heating is reached the square
is fixed
DRAIN
Drain in progress (only with drain pump
installed)
4.2.4 Interlock devices
As an interlocking device, a microswitch is used, fitted on the dishwasher door and positioned in
such a way that it cannot be tampered with
This micro switch stops the water intake in the event that the door is opened, without switching off
the power supply on the machine.
If the door is opened during the wash cycle, the cycle is cancelled.
Upon closing of the door it is necessary to restart the cycle.
4.2.5 Removable and adjustable safety guards
No adjustable or removable guards are provided, as they are not necessary.
4.3 Safety measures
Several basic rules must be complied with when using the dishwasher:
• The dishwasher must never be removed from its original position when working
• Make sure the water supply tap is open before turning the appliance on
• Never clean with corrosive products acids, steel wool or steel brushes
• Never wash the appliance with direct or high-pressure jets of water
• At the end of daily use, switch off the dishwasher
• Inspect the general situation of the machine before use, with particular attention to the electric
power supply connections and the operation controls
• The dishwasher must be clean and possibly free from residues from previous wash cycles and in
a good working condition. All the auxiliary accessories must be installed correctly and be efficient
• if the dishwasher, for any reason, must remain unused, it is advisable to display a sign with the
wording "Out of Service" If necessary, disconnect the dishwasher from the mains
• Always keep the control panel clean and dry
• In the event that a spoon or other small object falls inside the tank, the tank will need to be
emptied:
1. switch off the dishwasher using the ON/OFF KEY (see para. 4.6) and disconnect it from the
mains
2. remove the overflow pipe (fig. 16)
3. if the dishwasher is equipped with drain pump, before turning it off, remove the overflow tube
(fig. 16) and operate the pump by pressing the DRAIN PUMP KEY (see para. 4.6). When draining is
finished, the dishwasher switches off. Disconnect it from the mains.
REGENERATION
Insufficient salt or regeneration in
progress (only with built-in water
softener)
MAINTENANCE REQUEST
Servicing of the dishwasher is requested
ALARM
Presence of anomaly
23
EN
23
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
