Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PANEL ELEMENT
11.4
USER MENU
By once pressing P3 key you can hace access to user parameter controlling. To let them slide press P5 and P6
keys. They are:
POS.
REFERENCE
FAN ADJUST
1
(supplementary)
2
SET CLOCK
3
SET CHRONO
SELECT
4
LANGUAGE
5
STAND-BY MODE
BUZZER MODE
6
(audio alarm)
7
INITIAL LOAD
8
STOVE STATE
9
TECHNICA SETTING Only for the Authorized Technician.
10
FLAME SETTING
VENUS PLUS - GIOIA-2
DESCRIPTION
Exchanger fan: active.
-
Alarm: active.
Fig. 36 - LCD control display
LEGEND
Fig. 36 page 21
1
Time
2
Power
3
State
4
Message
5
Temperature
DESCRIPTION
Press once P3: Nr2 fan appears (for one ducting) or Nr2 and Nr3 fans appears (for double
ducting). See FAN ADJUSTMENT page 24.
Set date and time. The board is provided with a lithium battery which enables a clock
autonomy of 3/5 years. See CLOCK SETTING page 23.
Press once P3: "CHRONO ENABLE" appears. Press P3 again and with P1 and P2 put in "OFF"
or "ON". For daily, week-end or weekly programming, see DAILY PROGRAMMING page
23. CAUTION: do not active if STAND-BY function is active!
Press once P3 key and with P1 and P2 keys select the desired language.
It activates a function which, if the set ambient temperature has been exceeded for more
then 10 minutes, start the switching off phase up. If the ambient temperature has fall at
more than 2°C, the stove will restart automatically up, starting from START UP page 22.
Press once P3 key and with P1 and P2 keys put in "OFF" or "ON". CAUTION: do not activate
if CHRONO function is active!
Press once P3 key and with P1 and P2 keys put in "OFF" or "ON".
When the stove has its first ignition, the auger is completely empty. If it should be necessary
do a precharge by pressing P3 key, then P1 key for starting up and P4 key for stop.
It shows all parameters connected to the stove state: this is a menu for the Authorized
Techinician
It enables to set the flame dipending on the draught of the chimney flue.
EN
21
Advertenties
Hoofdstukken
Inhoudsopgave
