Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8. CLEANING
Chlorine based disinfection - General
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Wipe the product with a sponge or soft cloth wetted with a solution of chlorine-based disinfectant diluted to
1000ppm.
4. Thoroughly rinse with fresh water using a soft cloth or sponge.
5. Thoroughly wipe the product with a soft cloth or dry sponge.
Chlorine based disinfection - Blood stain removal
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Wipe the product with a sponge or soft cloth wetted with a solution of chlorine-based disinfectant diluted to
10,000ppm.
4. Thoroughly rinse with fresh water using a soft cloth or sponge.
5. Thoroughly wipe the product with a dry sponge or soft cloth.
Steam cleaning (with or without cleaning chemicals)
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Steam cleaning should be performed by carefully following the manufacturer's instructions. If cleaning chemicals
are used, the product should be thoroughly rinsed afterwards with fresh water.
4. Thoroughly wipe the product with a soft cloth or dry sponge.
Hydrogen Peroxide Sterilisation
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Hydrogen peroxide sterilisation should be performed by carefully following the manufacturer's instructions.
4. Thoroughly wipe the product with a soft cloth or dry sponge.
Please refer to our website for a list of approved cleaning and disinfecting products.
8.2 MATTRESS FOAM
The mattress cover is waterproof, vapor permeable and features welded seams and a waterproof zip. If the mattress
cover is punctured it should be replaced to avoid contamination of the mattress foam.
The mattress foam is not suitable for cleaning and if it becomes soiled or contaminated it must be replaced.
8.3 MATTRESS CLEANING PROCEDURE
1. Raise the stretcher to your working height.
2. Strip the stretcher of soiled linen and place in the linen skip.
3. Wash the top of the mattress with an approved cleaning product.
4. Dry the surface with a clean dry cloth or air dry.
5. Fold the mattress in half, folding over from the foot end towards the head end.
6. Wash the bottom half of the mattress.
7. Wipe over the deck surface.
8. Wipe dry both the deck surface and the mattress.
9. Fold the mattress flat on the stretcher.
10. Fold the mattress in half, folding over from the head end towards the foot end.
11. Wash the top half of the mattress.
12. Wipe over the deck surface.
13. Wipe dry both the deck surface and the mattress.
14. Make up the stretcher.
15. Return to normal height.
28
M9 Transfer Instructions For Use (M999-190, Version 1, 2022-04)
Advertenties
Hoofdstukken
Inhoudsopgave
