Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.1 CLEANING AND DISINFECTION INSTRUCTIONS (ALL SURFACES)
WARNING: Unplug the power cord from the mains supply and ensure castor brakes are applied before cleaning
and disinfecting.
CAUTION: The leg-raise panel must be physically supported when cleaning the underside.
CAUTION - General
•
Use only approved cleaning and disinfecting products.
•
Do not use abrasive cleaning and disinfecting products.
•
Do not use a water temperature of more than 50°C.
•
Do not use a washing tunnel, high-pressure spray or hose.
•
Do not immerse the product in water.
•
Do not clean or degrease the steel shafts of the actuators.
•
Keep sharp objects away from the mattress and mattress cover.
•
Do not use oil based products.
•
Do not unplug the handset or actuators from the control box for cleaning and disinfecting.
CAUTION - Chlorine based disinfection
•
Chlorine-based disinfectants are corrosive and degrading in nature and may cause damage to your product.
Therefore the product must be rinsed thoroughly with clean water and thoroughly dried. Failure to rinse and
dry the product will leave a corrosive residue on the surface possibly causing corrosion.
CAUTION - Steam cleaning
•
Steam cleaning can be performed if necessary but is not recommended for regular use.
•
Do not steam clean castors, electric components or mattresses.
•
Only use a lightweight steam cleaner and refer to manufacturer's instructions. Do not use a heavy duty
industrial steam cleaner.
CAUTION - Hydrogen Peroxide Sterilisation
•
Hydrogen Peroxide Sterilisation can be performed if necessary but is not recommended for regular use.
•
Hydrogen peroxide sterilisation should be performed by carefully following the manufacturer's instructions.
•
Not all hydrogen peroxide sterilisation devices are the same and it is essential that the user check with the
manufacturer to ensure that the materials being sterilised are suitable.
•
Corrosive damage to some steel components may result following repeated and prolonged hydrogen
peroxide sterilisation.
•
If any residue remains on the product following sterilisation it should be wiped dry.
Failure to follow the above directions may void the product's warranty.
Cleaning
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Wipe the product with a sponge or soft cloth wetted with warm water containing soap or mild detergent or
use an approved cleaning product in accordance with the manufacturer's instructions.
4. Thoroughly rinse with fresh water using a soft cloth or sponge.
5. Thoroughly wipe the product with a soft cloth or dry sponge.
Disinfecting
1. Unplug the power cord from the mains supply.
2. Depress the castor pedals into the brake position.
3. Wash the surface with one of the approved disinfecting products or use a pH neutral, high level disinfectant
cleaning product in accordance with the manufacturer's instructions.
4. Thoroughly rinse with fresh water using a soft cloth or sponge.
5. Thoroughly wipe the product with a soft cloth or dry sponge.
M9 Transfer Instructions For Use (M999-190, Version 1, 2022-04)
8. CLEANING
27
Advertenties
Hoofdstukken
Inhoudsopgave
