Inhoudsopgave
Advertenties
Stopping
Warning! Blade continues to ro-
tate after the machine has been
switched off. Wait until all components
have come to a complete stop, before touch-
ing them.
1. Release the throttle interlock 2 and throttle
trigger 5.
2. When the engine operates idle, set the ig-
nition switch 3 to
gine.
Cutting Means
For best cutting performance, ensure that the
cutting means are sharp and not worn out.
Replace worn or damaged cutting means with
new ones of the same type.
Warning! Make sure the machine is
switched off, has completely cooled
down and the spark plug connector is re-
moved.
Always wear safety glasses and gloves to pro-
tect your eyes and hands while working on the
cutting means of the machine [e.g. switching
from brushcutting to trimming or vice versa].
Warning! Do not remove any ob-
struction of the cutting means by
hand. Use a proper tool ,e.g. a wooden
stick, to clear the cutting means.
156
GB
Spark Plug
Inspect the spark plug at least every 25 h of
use. Clean or replace it with a new one if nec-
essary (TORCH L8RTC):
1. Pull the spark plug connector 17 from the
2. Loosen the spark plug with the wrench
3. Carefully remove any debris like oil with a
(off), to stop the en-
4. Dry the spark plug with a soft cloth.
5. The spark plug gap should be 0.6 - 0.7 mm
6. If damages are found, replace the spark
7.
Carburettor & Silencer
The carburettor and silencer are adjusted by
the manufacturer. If changes are necessary,
please contact your Hornbach store for assis-
tance. Do not attempt to make adjustments by
yourself!
spark plug to unplug it.
provided and remove it.
brass brush.
and the coulor of the electrode shall be
light brown.
plug with a new one.
Reinstall the spark plug with the wrench
provided and replug the spark plug con-
nector 17.
Caution! Do not overtighten the
spark plug to avoid any damage.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
