Inhoudsopgave
Advertenties
GB
MT
Control LEDs on the charger (31):
green
red
lights up —
—
lights up Battery is char-
—
flashes
flashes
flashes
Operation
Inserting and removing the
battery
WARNING! Risk of injury due to
unintentional start-up. Only insert
the battery into the device once the
device is fully prepared for use.
NOTICE! Risk of damage! An incor-
rect battery can damage the device
and battery.
Operating mode
Impact drilling
Drilling
Screw
Switching on and off
Switching on
1. Use the function selection switch
(5) to select an operating mode.
2. Select the direction of rotation with
the rotation direction switch (7).
36
Meaning
• Battery is fully
charged
• stand-by (No
battery inser-
ted)
ging
Battery is over-
heated
Battery is defect-
ive
Symbol
Inserting the battery
1. Push the battery (13) along the
guide into the battery holder (10).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release
(14) on the battery (13).
2. Pull the battery out of the battery
holder (10).
Selecting the operating
mode
Notes
• Use clamps or another practic-
al way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your
hand or against the body leaves it
unstable and may lead to loss of
control.
• Only operate the function selector
switch when the tool has stopped.
Procedure
Set the function selector switch (5) so
that the arrow mark points to the de-
sired symbol.
Material
Concrete, Stone
wood, metal,
plastic
Screwing in and
unscrewing
3. Select a gear with the gear select-
or switch (6).
4. Use the torque adjustment ring (3)
to select a maximum speed.
5. Press and hold the On/off switch
(17).
The LED work light (15) lights up.
Direction of rota-
tion
⭮
⭮
Screwing in: ⭮
Unscrewing: ⭯
Advertenties
Hoofdstukken
Inhoudsopgave
