Inhoudsopgave
Advertenties
Use hearing protection
Use respiratory protection
Symbols used in the instruction
manual
Attention!
General Power Tool Safety
Warnings
WARNING! Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool. Failure to follow all in-
structions listed below may result in
electric shock, fire and/or serious in-
jury. Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings
refers to your mains-operated (cor-
ded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable li-
quids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the plug
in any way. Do not use any ad-
apter plugs with earthed (groun-
ded) power tools. Unmodified
plugs and matching outlets will re-
duce risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators. There is an increased
risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water en-
tering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of
a cord suitable for outdoor use re-
duces the risk of electric shock.
f) If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of
an RCD reduces the risk of electric
shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while op-
erating power tools may result in
serious personal injury.
b) Use personal protective equip-
ment. Always wear eye protec-
tion. Protective equipment such
as a dust mask, non-skid safety
shoes, hard hat or hearing protec-
GB
MT
29
Advertenties
Hoofdstukken
Inhoudsopgave
