Inhoudsopgave
Advertenties
Note: If you have problems restarting the robot, place it at a maximum distance of 50 cm from the
boundary wire and restart it. Your personal settings will remain unchanged.
18. Technical data
Lithium battery Voltage
Lithium battery capacity
Engine
Cutting speed
Cutting system
Possible area size
Manual_FX-RB218_Int24_rev1
The robot runs, but
does not cut the grass
The regular working
time after each
charging process has
become shorter.
Robot does not
routinely come out
after prior activation of
the rain sensor.
Robot drives round
itself in circles
Black screen
Screws for fastening the
blade disc are loose.
Foreign objects have
got between the disc
and drive
The cutting height is set
incorrectly.
The charging contacts
are dirty
The capacity of the
battery has decreased
after frequent charging
and discharging.
The rain sensor is still
active
It finds no signal
28V
2Ah
Brushless electric motor
2900 rpm
3 blades with milk function
600m²
48
Fasten the
corresponding screws
carefully.
Remove the foreign
bodies completely.
Set the cutting height
appropriately
Clean all charging
contacts carefully.
A new battery is
required to be able to
work efficiently again
Clean all metal contacts
thoroughly with Spritus
Check that no more
than 250 metres of
cable have been laid
(total number)
Place the machine back
in the charging station
and charge the mower
for at least 10 minutes.
Then switch the mower
off and switch it on
again after approx. 1
minute. The screen
should now display
again.
Advertenties
Inhoudsopgave
