Inhoudsopgave
Advertenties
Manual_FX-RB218_Int24_rev1
13. Planning
Determination of the working area:
To ensure that the robot can mow in the desired area - and only in this area - you must mark the area
with a boundary wire.
Before you start, it is important to make a sketch of the robot's working area and the "obstacles" it is
to avoid, which should therefore also be marked with boundary wire. The boundary wire should be
laid so that the distance between the robotic lawnmower and the boundary wire is never more than
a maximum of 15 metres.
If your neighbour also has a robotic lawnmower, it is important that you lay your boundary wire and
docking station at least 100 cm away from your neighbour's boundary wire. To maximise the signal,
we recommend that you do not lay more than 400 m of wire.
To avoid problems later on, you should follow the sketch carefully to lay the boundary wire correctly.
Positioning the charging station
Start by placing the charging station on your sketch at an appropriate distance from your outdoor
socket (230 V). The mains cable of the charging station is 8 m long. It is important to position the
cover so that the LED indicator of the charging station is under the cover.
The charging station must be placed on a firm, level surface with the "IN" arrow on the charging
station pointing towards the work area.
32
Advertenties
Inhoudsopgave
