Inhoudsopgave
Advertenties
First use
During normal use
Manual_FX-RB218_Int24_rev1
The robot does not
connect to the charging
contacts when it
returns to the charging
station.
The robot stops and the
battery level indicator
only shows a dash.
Robot drives over the
boundary wire and
stops near it.
Loud noises and
vibrations
Uneven structure of the
charging station
The battery is empty
The wheels may be
covered with mud and
debris, resulting in poor
grip.
The angle in the
corners of the
perimeter wire is less
than 100°
The signal of the
perimeter wire is faulty
The blades are blunt
and the cutting system
runs out of round.
Blade disc was
damaged.
47
can recognise the signal
normally.
Check the structure of
the charging station
with a spirit level and
smooth the surface of
the lawn if necessary.
Return the robot to the
charging station and
allow it to charge.
Note: If the robot
indicator lights up
green constantly, the
battery is OK. If the
robot indicator flashes
green for more than 2
hours, the battery is
faulty or there is no
contact between the
charging contacts of the
station and the
contacts of the robot.
Clean the robot's
wheels and, if
necessary, the lawn.
Increase the angle
accordingly.
Check that the plug
connection is correctly
seated. Check the cable
for breaks.
Turn the cutting blades
or replace them. Please
do both for all blades at
the same time.
Replace the disc.
Advertenties
Inhoudsopgave
