Download Inhoudsopgave Inhoud Print deze pagina
Inhoudsopgave

Advertenties

The operator or user is responsible for accidents or hazards that occur to other persons or their
property.
Preparation
Please always keep the adapter clean and in a safe place.
Ensure that the perimeter wires are installed correctly and in accordance with regulations
Regularly inspect the robot's working area and remove all stones, sticks, wires, bones and other foreign objects.
Check regularly that the blades, blade bolts and blade disc are not worn or damaged. Replace worn or damaged
blades and bolts in sets to maintain the correct balance.

During use

Keep hands and feet away from rotating parts/blades.
Never lift or carry a machine while the engine is running.
Switch off the mains switch (0):
- Before you move an obstacle out of the way in front of the machine
- Before checking, cleaning or working on the machine.
Important: Do not leave the machine unattended if you know that pets, children or people are in the
vicinity.
Maintenance and storage:
Never clean the underside of the mower with running water. It should only be cleaned with a brush/cloth (slightly
damp at most).
All nuts, bolts and screws must be firmly tightened to ensure that the machine is in a safe operating condition.
Worn or damaged parts must be replaced for safety reasons.
Ensure that only authorised parts are used when replacing blades and screws.
Ensure that the batteries are only charged with the correct charger / adapter recommended by Fuxtec. Improper
use can lead to electric shock, overheating or leakage of corrosive liquid from the battery.
In the event of leakage from the battery, rinse with water or neutralising agent and seek medical assistance in the
event of eye contact etc.
The machine should be maintained in accordance with the manufacturer's instructions.
Please also note the point: Maintenance and winter storage.
IMPORTANT: Before installing the robotic lawnmower, mow the lawn to a
maximum height of 3 cm with your conventional mower. This will avoid the
error message E8 (grass too high).
Manual_FX-RB218_Int24_rev1
31

Advertenties

Inhoudsopgave
loading

Inhoudsopgave