Inhoudsopgave
Advertenties
Avoid placing the charging station:
•
in a corner of the lawn,
•
in low-lying areas where the charging station or the robotic lawnmower could be damaged by puddles,
•
on a slope or
•
under a tall tree due to the risk of lightning strikes
Note: It is important that the adapter and the electrical plug are always kept dry!
You must allow 2 metres of free space without obstacles in front of the charging station so that the
appliance can easily return to the station. A clearance of 1 m is required behind the charging station.
Laying the boundary wire
•
The boundary wire must be connected to form a continuous wire without interruptions or crossings. 100 metres of
wire are included in the scope of delivery.
•
There should be a maximum of 1 m between each peg. 150 pegs are included in the scope of delivery.
•
Do not form right-angled (90°) corners. The corners must be at least 100° (see drawing).
•
The boundary wire must be laid 35 cm from the boundary line of the lawn.
Manual_FX-RB218_Int24_rev1
33
Advertenties
Inhoudsopgave
