Inhoudsopgave
Advertenties
1. IN
- from under the charging station (end of the cable)
2. OUT
- to the lawn (start of the cable).
After you have connected the two ends (IN and OUT), put on the protective cover
•
You can now attach the charging station to the floor.
Charging and checking the charging station
•
Place the robotic lawnmower in the charging station for charging, even if the robot has been pre-charged at the
factory.
•
Connect the cable to the adapter and then to the main power supply. The LED indicator on the charging station
lights up.
FLASHING
GREEN
CONSTANT: Fully charged and correctly connected to the boundary wire.
•
The charging station is now ready for operation.
at the charging station must always point in the direction of the
Manual_FX-RB218_Int24_rev1
RED: No connection to the boundary wire,
or boundary wire is interrupted somewhere.
GREEN: Charging and correct connection to the boundary wire.
Important: The "IN" arrow
working area / towards the lawn.
36
Advertenties
Inhoudsopgave
