Advertenties
Electrode gap
Spark plug
Tightening torque for fitting the spark plug
Fuel mixture
Tank capacity
cut-off wheel arbor size / diameter of centering bush
cut-off wheel arbor size / diameter of centering bush
Minimum flange outside diameter for diamond cut-off
wheels (only for steel-core wheels; the flanges are marked
with "FOR DIAMOND ABRASIVE STEEL CORE WHEELS
ONLY")
Minimum flange outside diameter for abrasive cut-off
wheels (composite wheels)
Maximum cut-off wheel outside diameter
Maximum nominal cut-off wheel thickness (only for steel-core
wheels)
Maximum nominal cut-off wheel thickness (composite
wheels)
Tightening torque for fitting the cut-off wheel
4.3
Noise information and vibration values
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one gasoline-powered saw with another. They may be
used for a preliminary assessment of exposure.
The data given represents the main applications of the machine. However, if the machine is used for different
applications, with different accessory tools or is poorly maintained, the data may vary. This may significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the machine is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the machine and accessory tools, keeping the hands warm and organizing work
patterns.
Noise emission values
Emission sound pressure level in accordance with EN ISO 19432-1 (ISO
11201) (L
)
pa,eq
Uncertainty
Measured sound power level in accordance with 2000/14/EC (ISO 3744)
(L
)
wa
Uncertainty
Guaranteed sound power level in accordance with 2000/14/EC (ISO 3744)
(L
)
wa
Total vibration
The sound pressure level and the vibration values were determined allowing for 1/7 no-load operation and
6/7 full-load operation.
EN ISO 19432-1 vibration emission value at grip, front (a
Uncertainty
EN ISO 19432-1 vibration emission value at grip, rear (a
Uncertainty
28
English
DSH 600-X
0.7 mm
NGK, type: CMR7A
12 Nm
API-TC oil 2% (1:50)
0.87 ℓ
20 mm
25.4 mm
60 mm
78 mm
300 mm
4.5 mm
4.0 mm
25 Nm
102 dB(A)
1.6 dB(A)
113 dB/1pW
1.1 dB/1pW
115 dB/1pW
)
≤ 2.5 m/s²
hv,eq
1.8 m/s²
)
≤ 2.5 m/s²
hv,eq
0.9 m/s²
2136486
*2136486*
Advertenties
