Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Follow these steps to recharge the battery:
1. Open the Charging Port Cover.
2. Plug the Charging Connector into the Charging Port located on the Control Unit.
Be sure to align the angled corners of the power supply connector to the angled
corners of the connector inside the control unit.
3. Plug the power supply into any standard AC Wall Outlet. Do not plug in the power
supply for the PhysioStim device where it will be difficult to unplug.
4. The Control Unit LCD will display a battery symbol filling to verify that the device
is charging. When the battery reaches a complete charge, a check mark symbol
will be displayed next to the battery symbol. In addition, the device will beep
once to alert the patient.
5. If the battery is fully depleted, it may require up to 4 hours to charge completely.
6. After charging is complete, remove the Charging Connector and replace the
Charging Port Cover.
AC Power Supply
AC Charging Connector
Angled Corners
Charging Port Cover
5
Advertenties
Hoofdstukken
Inhoudsopgave
