Advertenties
Beschikbare talen
Beschikbare talen
& O HDQLQJWKHGHYLFHZLWKZDWHU¿ J
1. Place the hose connector on the water connec-
tion (5) of the petrol ride-on lawnmower and open
the water tap.
2. Start the petrol ride-on lawnmower and switch on
the mowing unit (11) by pushing the lever for the
mowing unit (11) forward and to the right until it
engages. The rotating cutter bar dashes the water
against the underside of the petrol ride-on lawn-
mower and in doing so cleans it.
3. After approx. 30 seconds, switch off the pet-
rol ride-on lawnmower and the mowing unit (11)
again.
4. Close the water tap and pull off the hose connec-
tor.
5. Clean the top side with a cloth (do not use any
sharp objects!, e.g. measuring tools).
Note: It is easiest to remove the dirt and grass im-
mediately after mowing. Grass residues and dirt that
have dried on can impair mowing. Check that the
grass ejection channel is clear of grass residues and
remove these if necessary.
Never clean the mower with a water jet or high pres-
sure cleaner. The motor should remain dry.
Do not use aggressive cleaning products such as
cold cleaners or white spirit.
Never drive close to an edge or ditch for cleaning
work (e.g. on the frame of the petrol ride-on lawn-
mower).
To avoid fire hazard, keep combustion engine, cool-
ing fins, battery compartment, area around fuel tank
and exhaust pipe free from grass, leaves or leaking
oil (grease).
Always clean the catch basket.
13.3 Maintenance work
Only maintenance work described in this operating
manual may be carried out; have all other work car-
ried out by a specialist dealer. If you lack the neces-
sary knowledge and tools, always consult a specialist
dealer.
We recommend that maintenance work and repairs
be carried out only by a specialist dealer.
Only use tools, accessories or attachment devices
which are permitted by the manufacturer of this de-
vice or technically similar parts, otherwise there may
be a danger of accidents resulting in personal injury
or damage to the device. If you have any questions,
you should contact a specialist dealer.
Original tools, accessories and spare parts are opti-
mally matched to the device and the user's require-
ments.
The petrol ride-on lawnmower should be checked by
the specialist dealer once a year.
Keep warning and instruction labels clean and leg-
ible at all times. Damaged or lost stickers must be
replaced with new original ones. If a component is
replaced by a new part, make sure that the new part
has the same stickers.
For safety reasons, fuel-carrying components (fuel
line, fuel valve, fuel tank, tank plug, connections, etc.)
must be checked regularly for damage and leaks and
replaced by a specialist if necessary.
Before starting work on or near electrical compo-
nents, disconnect the battery connection cable (24)
from the engine connection cable (24a).
The device is equipped with numerous safety fea-
tures. These devices must not be removed or modi-
fied (bypassed, etc.) and must be checked at regular
intervals. Work on the safety devices may only be
carried out by a specialist.
Keep all nuts, pins and screws, especially the blade
fixing screw, firmly tightened so that the device is in a
safe operating status.
Worn or damaged parts must be replaced immediate-
ly for safety reasons.
Regularly check the catcher (e.g. catch basket, ejec-
tor chute) for wear, damage or loss of functionality.
Working under the machine requires special care due
to the weight of the petrol ride-on lawnmower. Con-
tact your specialist dealer for this.
Check that the front and rear wheels are secured.
Always keep the petrol ride-on lawnmower and at-
tachment devices in good working order; all safety
devices must be in place and in good working order.
Check the function of the brake regularly (every 25
operating hours) and have the necessary settings or
maintenance work carried out by a specialist work-
shop if necessary.
13.3.1 Wheel axles and hubs
To ensure the smooth running of the wheels, we rec-
ommend cleaning and lightly greasing the wheel ax-
les and wheel hubs at least once per season.
NOTE:
The front and rear wheels (7 + 4) must be disassem-
bled to grease the axles and hubs.
www.scheppach.com
GB | 51
Advertenties
