Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL
MACHINE DESCRIPTION
CONTROL PANEL (as shown in Figure 2)
31
32
33
34
35
36
Figure 2
31. LED screen
32. Discharged battery warning light (Red)
33. Battery semi-discharged indicator (Yellow)
34. Horn button
35. Solution volume adjusting button
36. Forward-Backward switch
37. Battery fully charged indicator (Green)
38. Solution tank empty indicator
39. Brush button
40. Key switch
41. Brush unload button
LED SCREEN DISPLAY INFORMATION
STOP– Machine cannot move, brush stops working but vacuum motor can work
(00012.3) – Total working hours of machine are 12.3hours
L0-(18) – Battery voltage lower than 18V
U-(25.5) – Battery voltage is 25.5V
ERR-01 – Squeegee is not lifted when machine turns backward
DISPLAY WINDOW OF CHARGER INDICATON LIGHT (as shown in Figure 2)
1. At the beginning of charging, the Yellow LED (48) twinkles, the red LED (47) and green LED (49) turn on for a second,
on the red LED turns off, and then the green LED twinkles a few times before the red LED on charger is normally. It
is the first stage of charging.
2. After charging for some time, the red LED (47) on charger turns off, the yellow LED (48) turns on, this is the second
stage of charging.
3. When charging is completed, the yellow LED (48) turns off, the green LED (49) turns on to indicate that the battery
is fully charged.
NOTE
In the process of charging, if the yellow light (48) is on, it may be caused by: Battery and charger doesn't
match, battery is not connected well, or output is short-circuited.
The red light of charger flashing may be caused by the charger internal short circuit.
44
37
45
38
39
46
40
41
42
43
42. Drive motor trouble light
43. Speed adjusting knob
44. Vacuum motor overload protector
45. Drive motor overload protector
46. Brush motor overload protector
47. Battery charge indicator (Red)
48. Battery semi-charged indicator (Yellow)
49. Battery fully charged indicator (Green)
50. Charger plug cover
51. Charger plug
5
ENGLISH
47
48
49
50
51
Advertenties
