Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
Before cleaning the machine, make sure that it is
unplugged. Do not clean the machine with gasoline
and/or solvents of any kind.
•
Repair work may be performed only by a Service
Center authorized by the Manufacturer and/or
specialized, trained personnel.
Do not obstruct the grill vents on the side of the
•
machine.
Do not site the machine near heating equipment
•
(stoves or radiators).
•
ln case of fire, use carbon dioxide(L02) extinguishers.
Do not use water or powder extinguishers.
In the event of improper use, all warranty rights
will be Forfeited and the manufacturer will accept
no liability for Injury or damage to persons and/or
property.
The following are to be considered improper use:
-
any use other than the intended use and/or with
methods other than those described herein.
-
any operation on the machine that is in contrast
with the directions provided herein
-
use of the machine after any components have been
tampered with and/or safety devices have been
changed.
-
use of the machine after it has undergone repair
with
components
manufacturer;
-
outdoor installation of the machine.
3.2 Stop functions
The machine is shut down by turning off the main switch.
3.3 Plates
NONE OF THE PLATES OR LABELS APPLIED ON THE
MACHINE MUSTBE REMOVED COVERED OR DAMAGED.
ESPECIALLY THOSE RELATING TO SAFETY.
4. HANDLING AND STORAGE
All the operations described in chapter 4
may
be
carried
technicians who are also specialized in the
lifting and handling of packed or unpacked
machines. They must organize all the
operational sequences and use suitable
equipment, according to the characteristics
and weight of the object to be handled and in strict
compliance with the applicable regulations currently in
force.
4.1 Packaging
This machine is shipped ready for use in a plywood case.
The plywood case comprises a pallet base and a cover,
which are secured together with screws.
not
authorized
by
the
out
exclusively
by
www.combisteel.com
Dimensions and weight of package
Width
Depth
7537.0005
280mm
570mm
7537.0010
490mm
570mm
7537.0015
690mm
570mm
Note: the dimensions and weight of the
packing container are approximate.
4.2 Conveyance and handling
Make sure that no one is stationed within
range of lifting and handling operations. ln
difficult conditions specialized personnel
should be appointed to oversee the movements of the
machine
Manual handling of the machine requires at least two
people. The machine must be moved into an upright
position, only after every bowl has been emptied of
product.
Lift the box and carefully convey it, avoiding mute with
obstacles Pay attention to the overall dimensions and any
parts sticking out.
Warning: Do not make any additional cuts on
the packing container.
The WARRANTY does not cover damage caused to the
machine during its conveyance and handling.
The Purchaser will bear the cost of repairing or replacing
damaged parts
4.3 Storage
Before the machine is placed in storage and
whenever the machine is started up again
after a period of storage, it must be
thoroughly cleaned and sanitized.
Warning: Do not store more than three machines stacked
on top of one another.
If the machine is to remain unused for a long period of
time due precautions must be taken with respect to the
place and duration of storage:
store the machine in a closed place:
•
•
protect the machine from shocks and stresses:
•
protect the machine from humidity and large
temperature fluctuations;
•
prevent the machine from coming into contact with
corrosive substances
Height
Weight
945mm
45kg
945mm
66kg
945mm
85kg
9
Advertenties
Inhoudsopgave
Probleemoplossen
