Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7.2 Disassembling the dispensing tap
Before removing the bowl it is recommended to
disassemble the tap;
after cleaning the tap must not be reapplied until the
bowl has been correctly positioned in its seat
Disassemble the tap and remove the pin (F) from its seat
to release all the other parts
Never dissemble the tap if the product or any
other liquid is present inside the bowl.
7.3 Removing the bowl and the lid
Removal of every machine bowl is fundamental to ensure
correct machine cleaning and sanitization
To remove a bowl correctly proceed as follows:
1. remove the lid as shown at paragraph 6.1.
2. raise the front part of the bowl to release it.
3. remove the bowl from its seat by pushing and tapping
lightly on the rear part.
4. take out the auger and remove the seals (A and B).
www.combisteel.com
15
Advertenties
Inhoudsopgave
Probleemoplossen
